Clik here to view.
Nortel SNMP SNMPv3 and SSH
A small guide that i wrote to help to configure Nortel (now Avaya) switches SSH and SNMP Passport ( ERS 88600) (5500 / 5510 / 4500 / 470 / 425..) Small switches (5500 / 5510 / 4500 / 470 / 425..)...
View ArticleClik here to view.
Nortel (Avaya) 8600 tips
Few tips to help with Nortel (Avaya) ERS 8600 Stop the “more” question at long output (like “terminal length 0″ at cisco) conf cli more false reset to factory default config bootconfig flags...
View ArticleClik here to view.
Cisco nexus enable all ports script
When configuring Cisco Nexus 7000 with VDC, Sometimes you need to enable (no shut) all the interfaces in each VDC, The problem is that in each VDC there are alot of interfaces, And there is alot of...
View ArticleClik here to view.
How to view fiber channel neighbors in cisco nexus
When you connecting switches with FC ports (fiber channel connection for SAN environment) you can’t use the ‘show cdp neighbors’ command to view connected switches but you can use ”show topology”...
View ArticleClik here to view.
NX-OS general commands
Useful commands for Nexus (7000, 5000, 2000) switches HSRP hsrp 102 preempt delay minimum 60 priority 120 ip 172.19.102.254 Command to lock the configuration when entering configuration mode...
View ArticleClik here to view.
Alcatel omniswitch commands
These commands are for R6 & R7 ——- general ——— ip interface vlan223 address 172.22.23.2 mask 255.255.255.0 admin-state enable vlan 223 ip interface vlan333 address 172.23.33.3 mask 255.255.255.0...
View Article
